01925 269835

Pumping Station and Waterproofing Specialists

Catalogue > Basement Waterproofing > Wall & Floor Membranes >  Wall Membranes


Wall Membranes

BDS8 - Tanking Wall Membrane 8mm stud (2m x 20m)

BDS8 - Tanking Wall Membrane 8mm stud (2m x 20m)

158.94 Inc Vat (132.45 Exc Vat)

Platon Wall Membrane 8mm stud (2.07m x 20m)

Platon Wall Membrane 8mm stud (2.07m x 20m)

158.94 Inc Vat (132.45 Exc Vat)

Cavity drain membranes provide an alternative to conventional cementitious tanking systems, which work by holding the water back. Cavity drain membranes work on the principle of allowing water to continue to penetrate the structure but control it in the air gap and divert it to a suitable drainage point.

They do not allow pressure to build up against the internal construction and the air gap behind the membrane allows the structure to breathe and to some extent to dry out. The membranes are lose laid on floors and fixed to walls using special plugs and sealing materials, with little or no preparation required to the substrate. Once the membrane has been fitted, wall surfaces can be dry lined or plastered directly and floors can be screeded or a floating dry board system installed.

Typical areas of use:

•Barn conversions
•Existing basement waterproofing
•Cellar conversions
•Structural waterproofing
•Retrofit
•New Build
•Damp proof membranes
•Gas barriers

Catalogue > Basement Waterproofing > Wall & Floor Membranes >  Wall Membranes


Back to Top