Sewage Pumping Station (Mini Lite)

Sewage Pumping Station (Mini 6 Series)

Price:£534.99 (Excluding VAT at 20%)

Quantity: 

Add - High Water A-Pak Alarm System + £85.23 No Thanks    Yes Add A-Pak

The Zoeller Mini Lite domestic sewage pumping station is a complete system for areas where gravity flow is not availiable. Designed for infrequent use. Optional A-Pak High Water Alarm if required.


Mini Sewage Pumping Station Includes:
1 x WU222 Model 50mm solids sewage pump (upto 6m lift)
1 x 610mm x 610mm HDPE moulded basin
1 x Pedestrian rated cover
1 x Non return valve
1 x Internal 50mm PVC discharge pipe work Kit
1 x seal for incoming and outgoing pipework
1 x 12 months warranty

240v - 4.4amp - UK plug

Domestic application areas:
•Small extensions
•Small conversions

All our pumping stations comply to BS EN 12050-1:2001 / BS EN 752-6:1998 standards.

•A "High Water A-Pak Alarm System" is recommended to ensure that there is no excess build up in the event of a pump failure.

Built to Conform with Building Regulations H1 Foul Drainage Page16. (Pumping Installations) Section 2.39 details!!

Sewage Pumping Station (Mini 10 Series) 10m lift

Price:£659.38 (Excluding VAT at 20%)

Quantity: 

Add - High Water A-Pak Alarm System + £85.23 No Thanks    Yes Add A-Pak

The Mini10 domestic sewage pumping station is a complete "job ready" product for use in areas where gravity flow is not available.
It is used for various drainage applications, with the mini system also used for the transfer of sewage or waste water, all specially designed for easy installation.

Optional High Water Alarm if required.

All you require is the pipework to and from the station!

The Mini10 is a small sewage pump station suitable for extensions, garden rooms and small applications

The standard pumping station consists of the SEMISON 450L 10 metre lift submersilbe pump and come complete with 50mm solid handling for peace of mind


Pump Features;

Cast iron / Stainless steel construction.
Full 50mm solids handling capacity.
Coolant filled motor.
Mechanical seal.
Non-clogging vortex impeller.
10 metres of cable.
Float switch as standard.
Single phase, 50Hz, 240 Volts
10m head

Tank Features

610mm x 635mm polyethylene moulded chamber
190 litre capacity
Non-return valve
Anti-flotation device helps to eliminate chamber from floating.
Supplied with 1 no.110mm seal to allow inlet to be drilled on site.
High water alarm available.
Job ready for easy installation.

Built to Conform with Building Regulations H1 Foul Drainage Page16. (Pumping Installations) Section 2.39 details!!