Sewage Pumping Station Maxi 2 (Twin Pump)

Sewage Pumping Station Maxi Twin Pump (1000ltr) 1000SW-2V267

Price:£1,977.99 (€2,270.73) (Excluding VAT at 20%)

Quantity: 

Upgrade - 10 Ton Rated Manhole Cover + £180.00 No Thanks    Yes Upgrade

Add - High Water A-Pak Alarm System + £85.23 No Thanks    Yes Add A-Pak

The Zoeller Maxi twin wastewater and sewage pumping station is a complete "job ready" product for use in areas where gravity flow is not available. It is used for various drainage applications, with the maxi system also used for the transfer of sewage or grey/waste water, all specially designed for easy installation. Optional A-Pak High Water Alarm if required.



Sewage/Greywater Station includes:
2 x 1/2 HP "Zoeller" V267 cast iron 50mm solids sewage pump (upto 5m lift)
1 x 1000mm x 1500mm poly moulded basin
1 x Pedestrian rated cover
2 x Non return valve
2 x Lifting cable
1 x Internal 50mm PVC discharge pipe work kit
1 x seal for incoming and outgoing pipework
1 x High water float switch
1 x Low water float switch
1 x Electronic control panel
1 x 12 months warranty

240v - 4.4amp - UK plug

Application areas:
•Single dwellings
•Large extensions

Approx. running cost = £0.077 (say 8p) for each complete hour of running. Assuming the pump runs for 30 mins ( several On-Offs) each day then annual cost = £14.60.

All our pumping stations comply to BS EN 12050-1:2001 / BS EN 752-6:1998 standards.

•A "High Water Siren Alarm" is recommended to ensure that there is no excess build up in the event of a pump failure.

Please Read Before PurchasingClick Here For CAD Plans & Installation Instructions

Built to Conform with Building Regulations H1 Foul Drainage Page16. (Pumping Installations) Section 2.39 details

Sewage Pumping Station Maxi Twin Pump High Head (1000ltr) 1000SW-2V292

Price:£2,440.69 (€2,801.91) (Excluding VAT at 20%)

Quantity: 

Upgrade - 10 Ton Rated Manhole Cover + £180.00 No Thanks    Yes Upgrade

Add - High Water A-Pak Alarm System + £85.23 No Thanks    Yes Add A-Pak

The Zoeller Maxi twin wastewater sewage pumping station (high head) is a complete "job ready" product for use in areas where gravity flow is not available. It is used for various drainage applications, with the maxi system also used for the transfer of sewage or waste water, all specially designed for easy installation. Optional A-Pak High Water Alarm if required.



Sewage Station includes:
2 x 1/2 HP "Zoeller" V292 cast iron 50mm solids sewage pump (upto 10m lift)
1 x 1000mm x 1500mm poly moulded basin
1 x Pedestrian rated cover
2 x Non return valve
2 x Lifting cable
1 x Internal 50mm PVC discharge pipe work kit
1 x seal for incoming and outgoing pipework
1 x High water float switch
1 x Low water float switch
1 x Electronic control panel
1 x 12 months warranty

240v - 6.6amp - UK plug

Application areas:
•Single dwellings
•Large extensions

Approx. running cost = £0.077 (say 8p) for each complete hour of running. Assuming the pump runs for 30 mins ( several On-Offs) each day then annual cost = £14.60.

All our pumping stations comply to BS EN 12050-1:2001 / BS EN 752-6:1998 standards.

•A "High Water Siren Alarm" is recommended to ensure that there is no excess build up in the event of a pump failure.

Please Read Before PurchasingClick Here For CAD Plans & Installation Instructions

Built to Conform with Building Regulations H1 Foul Drainage Page16. (Pumping Installations) Section 2.39 details